What to do if my IQAir Air Cleaner cannot be switched on again after closing?
If your IQAir Air Cleaner won't turn back on after you've closed it, the most likely cause is that the lower filter module is missing, preventing a microswitch from engaging. To fix this, open the unit and make sure to insert the lower filter module.
How to fix an IQAir Air Cleaner that does not close properly?
If your IQAir Air Cleaner doesn't close correctly, it might be because the upper part is misaligned with the lower part. To resolve this, open both locking arms and simultaneously push them towards the center.
General| Filter Type | HyperHEPA, Activated Carbon, Pre-Filter |
|---|---|
| Fan Speeds | 6 |
| Weight | 35 lbs |
| HyperHEPA Filter Efficiency | 99.5% at 0.003 microns |
| Coverage Area | Up to 1125 sq ft |
| Airflow | 300 CFM |
| Dimensions | 28" x 15" x 16" |
| Air Delivery Rate (CADR) | 300 CFM (smoke), 300 CFM (dust), 300 CFM (pollen) |
| Pre-Filter | Yes |
| Filter Life | Pre-Filter: 18 months, HyperHEPA: 4 years |
| Activated Carbon Filter | V5-Cell Gas & Odor Filter |
| Particle Filter | HyperHEPA Filter |
| Air Changes per Hour (ACH) | 4.8 ACH at 1125 sq. ft. |
Steps for safely removing from packaging.
Steps to access filter compartments.
Instructions for reassembling housing.
Detailed procedure for replacing pre-filter.
Detailed procedure for replacing gas/odor filter.
Detailed procedure for replacing HEPA filter.
Tracking filter life and replacement signs.
Terms and conditions of product warranty.
Information for obtaining technical assistance.
To Next Page
