iQsim MR40 - Page 8

iQsim SA © 2023 MR40 QUICK SETUP GUIDE v1.00 Page 8/9
4.2 LED LIGHTS SIGNIFICATION
Description
The MR40 product has in total 6 LED.
• PWR
• SYS
• 2.4G
• 5.8G
• 4G/5G
• USB
At Normal Usage , your router will have the power on LED in addition to Wi-Fi frequency LED lights on.
During an update or the starting-up the led SYS is blinking.
Overview
LED description
Mark
Description
PWR
Off: Powered Off
On : Powered on
SYS
Off : System is running normally
Blinking : Operation system on going (starting up, update…)
2.4G
Off: WIFI is off.
On: WIFI is on.
Blinking: WIFI has data traffic.
5.8G
Off: WIFI is off.
On: WIFI is on.
Blinking: WIFI has data traffic.
4G/5G
Modem registered to the network
USB
Data traffic
Tricks
The behavior of these LEDs can be modified in the side menu SYSTEM and the item LED configuration.