IQUNIX L80 Driver Installation Guide
● Two firmware needs to be updated first to successfully use the driver
for L80.
Step 1: Update the firmware on Windows in wired mode.
Step 2: Update the firmware on IOS via BlueTooth mode.
Step 3: Install and apply the driver
● Please make sure to do Step 1 and then Step 2. If not, the keyboard will be
completely UNRESPONSIVE.
● If the IOS firmware does not upgrade successfully at step 2, the keyboard will
remain UNRESPONSIVE.
● If you only update it on one of the systems, the keyboard will remain
UNRESPONSIVE.
******Very important*****
*Please note that there is a chance that the files are reported by your
computer or your protection software as a risky file or file with a virus. It will
make the system delete the downloaded application. You will have to change
the security setting of your computer to successfully download in this case.
Our source is safe to download.*
You will need to update the firmware on TWO different systems to finish.
Please make sure to prepare BOTH no matter which system you use on a
daily basis.
Please have the following devices with you now to begin.
● IOS system (iPhone or iPad), and
● Windows 7 (or later) system
*************************************************************************************
To Next Page
Need help?
General
