How to fix iReliev ET-1313 Personal Care Products device that does not turn on?
If your iReliev Personal Care Product device does not turn on, it might be due to missing or bad batteries. Try replacing the batteries.
What to do if my iReliev ET-1313 device turns on, but does not generate electric pulses?
If your iReliev Personal Care Product device isn't generating electric pulses, ensure the lead wire cables are correctly connected and that the treatment time hasn't expired. Turn the unit off and then on again. Also, check that the therapy intensity level has been properly set.
Why does my iReliev ET-1313 device turn on and then off again?
If your iReliev Personal Care Product device turns on and then off again, the batteries may not be inserted properly. Remove the batteries and re-insert them. Alternatively, the batteries may be expired and require replacement.
Do not use this System if you have a cardiac pacemaker, implanted defibrillators, or any other implanted metallic or electronic device.
Read the following information carefully before using the iReliev™™ Pain Management System.
Read this operating and instruction manual before using the iReliev™™ system for the first time.
Do not use your iReliev™™ system with other devices transferring electrical current; ensure pads adhere firmly.
Steps to prepare the skin for electrode pad placement to enhance stimulation and reduce irritation.
Instructions for opening the battery compartment and inserting 3 AAA batteries.
Guide for common device issues like not turning on or not generating pulses, with remedies.
General| Product Type | TENS Unit |
|---|---|
| Intended Use | Pain Relief |
| Intensity Levels | 25 |
| Power Source | Battery |
| Display | LCD |
| Warranty | 1 Year |
| Timer | 5-60 minutes |
| Battery | Lithium-ion |
| Channels | Dual Channel |
To Next Page
