What to do if iReliev Massager turns on but doesn't generate electric pulses?
If your iReliev Massager turns on but doesn't generate electric pulses, there are a few potential causes. First, the cable might be broken, in which case you should replace it. Second, the cable may not be connected properly; ensure it is securely connected. Finally, the treatment time might have expired; try switching the unit to the OFF position and then back on.
How to fix iReliev Massager that does not turn on?
If your iReliev Massager does not turn on, it might be due to no battery or a bad battery. Replace the battery to resolve this issue.
General| Brand | iReliev |
|---|---|
| Model | ET-7070 |
| Category | Personal Care Products |
| Language | English |
Explains Transcutaneous Electrical Nerve Stimulation (TENS) for pain relief.
Explains Electrical Muscle Stimulation (EMS) for muscle performance.
Lists critical warnings regarding device usage and potential risks.
Details the process of inserting batteries into the device.
Connects lead wires to the device's channels for operation.
Connects electrode pads to the lead wires before skin application.
Instructions on safely removing electrode pads from their protective film.
Guides on the correct placement of electrode pads on the skin.
Explains how to power the device on and off safely.
How to select and adjust the duration of a therapy session.
Guides the user to choose between TENS and EMS modes.
Guides the user on selecting pre-set TENS and EMS therapy programs.
Details how to adjust the stimulation intensity level for each channel.
How to lock/unlock the device to prevent accidental setting changes.
Explains the safety feature where intensity resets to zero under certain conditions.
Diagrams showing correct placement for small electrode pads.
Instructions and link for registering the device online for benefits.
To Next Page
