Need help?Do you have a question about the iRest A307-8 and is the answer not in the manual?
Crucial guidelines to prevent harm and product damage, and specify suitable operating conditions.
Lists populations advised against use and general safety actions for users.
Guidelines on maintenance, troubleshooting common issues, and proper storage conditions.
Caution regarding pressure on the lifted legrest to prevent tipping and damage.
Advice against pulling cords during operation to prevent shocks and damage.
Ensure manipulator is clear before sitting to avoid discomfort or damage.
Check for children/pets under the chair when zero-gravity function is active.
Detailed identification and labeling of all parts of the massage chair.
Details the various massage techniques, automatic programs, and special functions.
Explanation of the LCD display and buttons on the remote control for operation.
Details on manual, airbag, foot roller, and heat massage functions and adjustments.
Guide to using shortcut buttons on the left and right armrests for quick access.
Instructions for using voice control and connecting Bluetooth devices.
Steps for legrest installation, floor protection, and moving the massage chair.
This document provides comprehensive instructions for the A307-8 Massage Chair, covering its functions, usage, and maintenance. It emphasizes safety warnings and precautions to ensure correct operation and longevity of the product.
The A307-8 Massage Chair is designed with advanced features to provide a comprehensive and customizable massage experience. It incorporates a set of manipulators that move up and down, utilizing a four-wheel drive system in a quiet mode. The chair offers five simulative massage techniques: Shiatsu, Kneading, Tapping, Knocking, and a combination of kneading and tapping.
A key feature is its automatic shoulder detection and positioning, which ensures the massage is tailored to the user's body. The chair boasts 12 automatic massage functions, including specialized programs for comfort, relaxation, stretching, shoulder & neck, back & waist, full body massage, chiropractic massage, fatigue recovery, meridians massage, beautiful buttock massage, peaceful sleep, and full air pressure.
For manual control, the chair allows users to select full body, fixed point, or local massage parts for the upper body. The speed of each massage manipulation can be adjusted across five levels. In fixed point and local modes, the manipulators' position can be adjusted up and down. During Tapping, Shiatsu, and Knocking massages, the width of the massage balls is adjustable to wide, medium, or narrow settings.
The airbag massage function offers three modes (body pressure, arm pressure, leg pressure) and three intensity levels. A foot roller massage function is also integrated. The legrest features a stepless flex adjusting function, accommodating users of different heights.
For added comfort, the chair includes a back heat treatment function, utilizing carbon fiber as a far-infrared heat source. The slide rail technology for the backrest ensures zero space between the backrest and the wall, maximizing space efficiency. The backrest guide adopts curve guide technology, conforming to the human back for a full body massage from head to thighs.
The chair also includes a music player system with 3D digital audio systems built into the left and right upper arms. Bluetooth functionality allows wireless music playback from smart devices. An intelligent voice control and recognition function enhances user convenience. The airbags for the left and right palms feature salient massage bands with magnetic therapy.
The left armrest is equipped with five shortcut keys: ON/OFF, legrest lifting, automatic mode, linkage adjustment, and zero gravity. The right armrest provides a USB charging function. Both armrests are fitted with LED atmosphere lamps. A color LCD screen remote controller is included for easy operation. After shutdown, the chair automatically returns to a sitting position, and the manipulators reset.
To begin using the massage chair, turn on the power supply. The chair initiates a comfort auto massage by default, followed by automatic angle adjustment and shoulder position detection to fit the user's posture. Users can fine-tune the shoulder position using the up/down keys, with 10 adjustable levels. If no adjustment is made within 10 seconds, the massage function starts automatically. During startup, users can select any auto function to skip the initial process.
The remote controller features an LCD display for all massage functions. A power switch turns the chair on or off. A pause/run button allows users to suspend or resume massage functions. The timing key adjusts the massage duration, with increments of 5 minutes up to a maximum of 30 minutes.
Three automatic lying modes are available, which can be switched according to user preference. Legrest up and down keys adjust the legrest position. Automatic massage buttons allow selection from the 12 pre-programmed functions. The air pressure mode key toggles the air pressure massage function and adjusts its intensity. Manual massage buttons provide granular control over techniques, speed, and width. The foot roller key activates the foot roller massage, with three intensity levels (weak, medium, strong) and an OFF state. The heat key turns the heating massage function on or off.
The left armrest includes shortcut keys for ON/OFF, legrest movement, automatic massage mode, linkage adjustment, and zero gravity. The zero-gravity key adjusts the legrest and backrest to zero-gravity positions, with three levels available. A long press of this key for 3 seconds toggles the voice control mode. The right armrest features a USB charging port and a slot for the remote controller or mobile phone.
The voice control mode is activated by saying "Hi Alice" or "Hey Alice" when the chair is on or in standby. A reply "I am here" confirms activation. Users can then issue commands like "Massage on," "Massage close," "Comfort Massage," "Relax massage," "Full body massage," "Neck and shoulder massage," "Back and waist massage," "Stretch massage," "Open the air pressure," "Close the air pressure," "Up the seat position," "Down the seat position," "Change the other mode," "Go little down," and "Go little up." English is recommended for voice commands, and speaking speed should not be too fast.
For Bluetooth speaker playback, users can connect their smart device by searching for the chair's Bluetooth model (e.g., IMCM-XXXX) in their device settings and selecting "Match." Once connected, music can be played through the chair's speakers.
To stop massage, pressing the power button during a massage immediately halts all functions, and the backrest, legrest, and manipulators return to default positions. If the preset massage time expires, all functions turn off, but the backrest and legrest do not return to default positions. After use, it is recommended to shut off the power supply.
Installation of the legrest involves connecting wires and the air hose, removing cable ties, inserting the connecting part into the seat, and placing the round tubes onto the legrest support.
The head cushion can be used to reduce the intensity of kneading massage on the neck and shoulders. It is connected to the backrest and back cushion by zippers.
The manual emphasizes several maintenance guidelines to ensure the product's longevity and safe operation. Users are advised to pull out the plug after use or before cleaning to prevent injury or damage. The product should be operated strictly as instructed in the manual, avoiding non-recommended parts or accessories. Each usage session is recommended to be 20 minutes.
The chair should not be used if the leather or cover is broken or damaged, or if the radiator hole is covered. Users should avoid dropping objects into the product, falling asleep while using it, or using it while drunk or unwell. It should not be used within one hour after a meal or with excessive force. Fragile, explosive, or combustible materials should not be carried in pockets while using the chair.
The operating environment should be dry, well-ventilated, and free from heavy dust or caustic substances. The normal room temperature range is 0 °C to 35 °C, and relative humidity should be between 20% and 80%. Direct sunlight, heat sources (stoves, air conditioner outlets), thunder, lightning, and dusty places should be avoided.
Safety precautions include checking voltage consistency, avoiding wet hands when plugging/unplugging, preventing water flow into the product, and refraining from pulling the power cord roughly. The wire or circuit should not be damaged or modified. Live parts should not be cleaned with a wet cloth. In case of power failure, users should stay away from the product to avoid injury upon power restoration. If the product malfunctions or the user feels unwell, usage should be stopped immediately, and a local supplier or healthcare practitioner should be consulted. If the power cord is damaged, it must be replaced by the manufacturer or qualified service staff.
Maintenance should only be performed by a designated service center. Users should not disassemble or maintain the product without permission. The main power switch should be turned off after use. If the power socket is loose, the product should not be used. For long periods of disuse, the power cord should be rolled up, and the product stored in a dry, dust-free environment, away from high temperatures, open flames, and direct sunshine.
Cleaning should be done with a dry cloth; thinners, benzene, or alcohol should not be used. The mechanical components are specially designed and do not require special maintenance. Sharp objects should not be used to stab the product. When moving, the chair should be lifted rather than rolled or pulled on uneven ground. Intermittent use is recommended, avoiding continuous operation for long periods.
In case of ordinary malfunctions, motor sounds during operation are normal. If the controller is not working, check the plug, power socket connection, and power switch. If the rated working time is exceeded, the chair automatically powers off. If it operates for a long time, the temperature protector will stop it automatically, and it can be used again after half an hour.
Storage conditions require a room temperature of -5 °C to 35 °C, relative humidity between 20% and 80%, and a well-ventilated room free of corrosive gases.
For floor protection, a carpet or cushion should be placed under the chair to prevent scratches due to prolonged heavy pressure. When moving the chair, at least two persons are required to lift it, using the legrest sealing plate and backrest cover grooves as acting points, not the armrest directly. For short-distance and slow movement, the rear moving wheels can be used. For long-distance transportation, auxiliary moving tools are recommended. Before moving, all wires should be pulled away, the power button turned off, and the power cord and remote controller connection wire unplugged. The backrest should be pressed down to a certain angle (with the center of gravity on the wheels), pushed forward to the desired position, and then gently restored to the normal angle.
General| Model | A307-8 |
|---|---|
| Adjustable Intensity | Yes |
| Remote Control | Yes |
| Massage Method | Kneading |
| Heat Function | Yes |
| Power Source | AC Power |
| Auto Shut-off | Yes |
To Next Page
