The iREST SUPEARL (A336) is a sophisticated massage chair designed to provide a comprehensive and customizable massage experience. It features a blend of advanced technology and user-friendly design, aiming to promote relaxation, relieve muscle tension, and improve overall well-being.
Function Description
The iREST SUPEARL (A336) is equipped with a set of massage manipulators that can move up and down, offering a four-wheel drive and mute design for quiet operation. It provides five simulated massage techniques: finger pressing, kneading, tapping, tapping and kneading at the same time, and shiatsu. The chair incorporates automatic shoulder detection and positioning to tailor the massage to the user's body.
This appliance is equipped with 12 automatic massage functions, including comfort, relax, stretch, shoulder & neck, back & waist, full body massage, chiropractic, massage fatigue recovery, meridians massage, beautiful buttock massage, sleep peacefully massage, and sedentary stretch massage. It also offers an upper body manual massage function (the whole body, fixed point, and local three massage parts are selected), allowing for precise adjustment of the massage manipulator's position and width. The massage ball can be wide, medium, or narrow.
A pneumatic massage function offers three modes and three levels of intensity selection, targeting body pressure, arm pressure, and leg pressure. The chair is equipped with a foot roller massage function for foot and calf massage. It features a leg frame with stepless adjustable function suitable for different height users. Both the back and calf heating functions utilize graphene for infrared heat source. The backrest frame adopts a slide rail technology to keep the zero-space against the deviation wall, maximizing space efficiency.
The music player system is advanced, with 3D digital audio systems built into the left and right upper arms, and Bluetooth function for intelligent device connectivity to wirelessly play music. The backrest frame guide adopts curve guide technology, which completely conforms to the curve of the human back, and can enjoy massage from head to thigh. The right armrest is equipped with wireless charging function. There is a USB charging function on the right armrest. The left and right armrests are equipped with LED atmosphere lamps. A LCD color screen controller provides intuitive control. The back heating function uses graphene as an infrared heat source. It also includes an automatic sitting function, manipulator automatic reset function, and the function of kneading and rubbing the calf.
Important Technical Specifications
- Model: iRest SL-A336
- Configure: 3
- Name: Massage Chair
- Rated voltage: 110-120V~ 60Hz or 220-240V~ 50Hz/60Hz (selectable)
- Rated power input: 140W
- Rated time: 20Min
- Safety structure: Class I
- Material introduction: PVC, PA, steel parts, and electric & electron parts.
- Material options: PU, Leather, Cloth, Wood
- Bluetooth frequency range and power: 2.5 mW
- Manufacturer's declaration: Product is compliant with Directive: 2014/53/EU. Full text of declaration of conformity is available online at https://restlords.com/en/declaration.
Usage Features
The iREST SUPEARL (A336) is designed for ease of use with an intuitive LCD display showcasing all massage functions. The control panel includes:
- Relax, Comfort, Stretch, Back & Waist, Neck & Shoulder: Automatic massage programs.
- Auto Key: For details, refer to page 11 of the manual.
- Massage hand adjust key: Adjusts the position of shiatsu points on shoulder massage positions adjustment (in fixed point mode and partial mode, the massage position can be adjusted).
- Back up key: Adjusts backrest frame to rise and calf frame down.
- Back down key: Adjusts backrest frame to lower.
- Power switch key: Turns on or off all massage chair functions.
- Auto Program key: There are 7 kinds of massage procedures, refer to page 11 of this manual for details.
- Times Key: Time adjustment, refer to page 13 of this manual for detail instructions.
- Manual key: For details, refer to page 12 of this manual.
- Air pressure area key: Adjusts the massage area for detailed instructions, refer to page 12 of this manual.
- Massage area key: Adjusts the massage area, for detailed instructions, refer to page 12 of this manual.
- Air pressure intensity key: A total of three levels of air pressure intensity can be adjusted.
- Speed key: There are 5 levels of massage speed that can be adjusted.
- Foot roller key: For details, refer to page 12 of this manual.
- Back heating key: A total of three levels of width can be adjusted.
- Back heating key: Turn on/Off heating.
- Pause/start key: For details, refer to page 13 of this manual.
- Auto lying key: There are 3 automatleying modes, which can be switched in cycles according to your needs.
Starting the massage: Press the power button to start the massage. The default is comfort massage. Dynamic adjustment and checking the position of the moving body and shoulder to keep the sitting posture fit with the massage chair are key steps. Fine adjustment of shoulder position is possible, with 10 levels in total.
Automatic massage functions include Relax (deep soft and comfortable massage), Comfort (most comfortable experience), Stretch (frame and backrest frame rise and fall, and/or pressure massage), Back&Waist (focus on back and waist), Neck & Shoulder (focus on shoulder and neck), Full body massage (deep massage to rejuvenate the body), Spinal massage (focus on spine massage and fully relieve fatigue and pain), Ache relieve (deep massage on acupressure points), Bottom Toing (improve overall blood circulation), Beautiful buttocks shaping (effective massage for buttocks and thighs), Good-night sleep (massage twelve health acupoints), and Leisure Health (for sedentary sitting).
Manual massage functions allow for adjustment of shiatsu, knead, knead pat, knock, and speed. Width adjustment (three gears), fixed point and spot massage, small area local round trip massage, and a round trip massage are available for back stretch. Hand Up and Hand Down buttons allow for manipulator up/down movement.
Pneumatic massage offers full pressure (arms), arm pressure (arms with focus), and leg (foot) massage, with adjustable intensity (three levels).
Foot roller massage has two functions: Foot roller (three levels of intensity, four states of cycle switching) and Calf kneading (long press for 3 seconds to turn on/off).
Heated massage can be turned on or off for back far infrared hyperthermia, turning off after 3 minutes.
Pause/start massage allows pausing and resuming massage. A "Children press unlock" feature prevents accidental operation.
Adjust lying angle with Sit up (backrest frame slowly rise, calf frame slowly fall) and Lay down key (backrest frame slowly down, calf frame slowly up). Lie down automatically has three modes.
Other manual functions include Timing, which allows adjusting massage time from 5 to 30 minutes.
Operation Instructions for Bluetooth Speaker Play:
- Enter the smart device main menu, open "Settings" and select the "Bluetooth" options. Open "Bluetooth", and Bluetooth will automatically "Search for a New Bluetooth Device".
- The smart device will search for the corresponding Bluetooth model (e.g. IMCM-XXX). Click "Match" button, if you are asked whether to match with the device, you just select "Match" to complete matching.
- Turn on "Music Player" in the smart device and select the song to play.
Turn off the power and stop massage:
- Press power key to turn off all massage functions when in massage process, the chair will reset automatically. All the massage functions are off while the chair will not reset if the massage time is over.
- Cut off the power of the whole machine, Figure (switch power off).
Voice Control Mode:
- The massage chair is turned on or in standby mode, the sound "Hi Alice" or "Hey Alice" will be produced to enable the voice control function. Alternatively, you can press the voice control button on the armrest to enable the voice control function.
- Press and hold the zero gravity key of the manual controller for 3 seconds to turn on or off the device control function.
- After such function is enabled successfully, the massage chair will reply "I am here". At this moment, once a corresponding voice control entry to be implemented is given within six seconds, the corresponding voice control function entry to be implemented is given within six seconds, the corresponding voice control function can be performed after a reply is received from the massage chair. If no correct voice control entry is given within six seconds, the voice control function automatically will be off automatically and needs to be enabled again.
- Voice Control Entry: A table of commands such as "Massage on", "Massage close", "Comfort Massage", "Relax massage", "Full body massage", "Neck and shoulder massage", "Back and waist massage", "Stretch massage", "Open the air pressure", "Close the air pressure", "Up the seat position", "Down the seat position", "Change the other mode", "Go little down", and "Go little up" are provided with their corresponding answers.
Installation:
- Calf installation: Connect wires and air hose between chair seat and leg rest, fasten fixed pipe belt and insert connecting part into seat frame. Place round tube from calf left and right sides to legs brackets. Turn legs fixing cover over round tube on both sides of legs. Use 2pcs M4 screws to fix legs on massage chair, turn up and down to check for problems, wires and air hose get stuck or not, then finish installation.
- Removal and use of head cushion and backrest: Match thread on knob of remote controller bracket assembly support to thread position of support mounting seat on armrest of massage chair, turn it clockwise and tighten it. The head cushion can reduce intensity of kneading massage on neck and shoulders. The backrest and head cushion are connected by a zipper.
Floor Protection: Put heavy massage chairs on wooden floor for damage prevention, place a carpet or other object to avoid damage.
Method of movement: Do not move chairs with its wheels on wood floor, rough ground or in a narrow space. Two people are required to lift the chair. During lifting period, take the calf rest end sealing plate and backrest cover grooves as the force-bearing point. Make sure all wires are far above the ground, tilt the backrest backward to a certain degree, push the chair forward or backward with your hands and finally resume the chair to the normal position in a slow and gentle manner. Turn off power first and then unplug power cord and controller cord. Massage chair rear wheels are only suitable for short distance movement.
Maintenance Features
Safety and maintenance:
- Important Safety Warning: Don't allow children to touch movable parts. Use well-grounding power supply. Pull out plug after use or before cleaning. Operate according to manual. Don't use accessories not recommended. Don't use outdoors. Read manual carefully before operation. Any other usage not listed is forbidden. 20 minutes of usage each time is recommended. Don't use if leather is broken or damaged. Don't use if cover or leather is damaged. Don't use if radiator hole is covered or blocked. Don't drop anything into product. Don't fall asleep while using. Don't use if drunk or feel unwell. Don't use within one hour after having meal. Don't make massage function too strong for avoiding injury.
- Environment for usage: Don't use under high temperature and moist environment such as bathroom. Don't use immediately while environmental temperature changes sharply. Don't use under heavy-dusty or caustic environment. Don't use where there is not enough space or not good ventilation.
- People who are not suitable to use this product: People suffering from osteoporosis, heart disease or carrying electronic medical equipment such as heart pacemaker. People suffering from fever. Pregnant women or women that are in menses period. People who got injured or skin disease. Children under 14-year old or people mentally unbalanced without being supervised. People who are told by doctor to have rest or people who feel unwell. People whose bodies are wet. Appliance has heated surface. Persons insensitive to heat must be careful.
- Safety: Check voltage for specification. Don't use wet hand to pull plug. Don't make water go inside to avoid electric shock or cause damage. Don't damage wires or change circuit. Don't use wet cloth to clean electric parts. Be away from product under power cut state to avoid injury. Stop using if product works abnormal, and consult local agent immediately. Stop using if you feel unwell, and consult health care doctor. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons.
- Maintenance: Product should be maintained by certain appointed agents, users are prohibited to disassemble or maintain by themselves. Don't forget to cut power after usage. Don't use if socket looses. If product is left unused for long, curl up wires and reserve in dry and dustless environment. Don't reserve product under high temperature or near fire and avoid longtime direct sunshine. If detachable cord / supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons. Clean product by dry cloth. Don't use thinner, benzene or alcohol. Mechanical components are specially designed and made, it is not necessary to be specially maintained. Don't use edged res to thrust product. Don't roll or pull product above uneven ground, it should be lifted before moving. Please use it intermittently, don't make product work continuously for long.
- Solution of ordinary malfunctions: If motor movement voice is low, motor sounds while in usage. If controller can't work normally, please check plug and socket. If rated working time is over, product will automatically activate power-off button. If product works continuously for long, temperature protector will make product automatically power-off, it should be used again after half an hour's rest.
- Storage conditions: Storage room temperature: 5°C - 35°C. Relative humidity 20% to 80%, no corrosive gas and well ventilated room.
Environmental protection: The device should be returned to the relevant collection point designated by your local administration for recycling. Do not dispose of the device together with your household waste.
Need help?
To Next Page
General
