EasyManua.ls Logo

iRest Y16 - The Method of Usage; Maintenance 11; Setting Password 11

iRest Y16
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 11
Maintenance
·If your product for shipping, handling and other reasons or stored in low
temperature environment for too long, please stay in room temperature for one
hour before use.
·If the product is placed in the special environment such as: local vulnerable to
dust, moisture, sulfur compounds such as erosion, please notify the installation
personnel to do the protective measures, otherwise it may cause body damage.
·Before cleaning products, please pull out the power plug from the socket.
·Do not use benzene, thinner or any erosion of the solvent cleaning machine.
·Please use dry cloth to clean the machine.
·Do not be the product of long-term exposure to sunlight, do not near the fire, high
temperature place.
·If there will be a few days not to use this product, suggest the power extracted
away and tidily store.
·Keep this product in a clean and dry space.
·Do not eat in the product, in order to avoid damage to the product.
·Storage conditions: at -10 to 55, humidity for RH 0-85%.
Setting password
Must Power Off
·Step 1Press the “A + M + MP3” buttons on the machine at same time and
release (Figure 1), Then will hear a sound , The machine enter to station of setting
the original key word, The screen will display 5 “ ”, acquiescent F as
first one.
·Step 2press “ speed +/speed – “ to adjust the digital
·Step 3Press “auto “ 5 digital display in turn , the key word successfully setting
·Step 4then press the wireless controller “reset” button for 5 seconds , the Indicator
light will (Figure 2)flashing twice. this means the controller reset success.
·Step 5Press “MP3” on the machine to send out the data(Figure3) , will hear a
sound ; Receive success and save . The screen data not flashing .
·Step 6 Finished, wireless controller can operate the machine now .
Figure 3Figure 2Figure 1
Balance pulling way
Left and right
stretch way
Crouch pulling way
Standing way
Moving way
Crouch way
The method of usage
Magic pull rope movement pattern (walking, jogging, run with three grade can
be free to choose)
In the magic rope mode of motionalso can use dumbbell substitution (as follow chart)
Note:The above movement is not unique, different people according to their own
needs, choose a different movement pattern.
·Balance pulling way (clenched magic rope with your hands,
arms flat, standing in run district)high frequency vibration in
the arms, hips and legs, effectively lose inside the arm fat,
improve the periarthritis of shoulder and neck soreness,
coordination and balance.
·Left and right stretch way (clenched magic rope with your
hands, left / right arm held flat to the opposite direction
traction)vibration in the leg and traction body from left /
right, effective stretching meridians, consumption of the
body on both sides of abdominal fat, shaping healthy body.
·Crouch way( left leg or right leg forward arch, right leg
or left leg backward, both hands to lift the magic rope)
to exercise the leg muscles and knee, increasing bone
density in the leg, contribute to the cardiorespiratory
exercise.
·Crouch pulling way (the legs slightly bent, hands along
the back pull rope to lift the magic.)increase the
pressure of the calf and knee, hip joint exercise,
stretching back channels, improve thecomputer arm
,mouse hand
·Standingway (standing in jogging/run district, to pull
magic rope with your hands)exercise the arm joints
and muscles, promote cervical vertebra corrective and
systemic blood circulation; relieve muscle soreness of
shoulder and back.
·Please unplug all the power wires , then raise one end
of the machine to proper angle (The CG falls on the
pulley) , Then can move forward or back , after move
put back the machine to the Normal angle .
Walk Jog Run