To Next PageTo Next Page
Need help?Do you have a question about the Iridium SBD9602 and is the answer not in the manual?
Lists the primary characteristics and capabilities of the Iridium 9602 SBD Transceiver.
Details regulatory approvals and certifications for the 9602 transceiver module.
Guidance on using software release notes with the 9602 SBD Transceiver.
FCC compliance statements and operating conditions for the 9602 device.
Industry Canada compliance statements for radio transmitter operation.
Summarizes the physical dimensions and weight of the 9602 transceiver module.
Provides mechanical information for mounting the 9602 module onto a host system motherboard.
Details the operating and storage temperature and humidity ranges for the 9602.
Outlines the environmental tests conducted on the 9602 transceiver.
Describes the three physical interface connectors on the Iridium 9602 SBD Transceiver.
Details the connections provided by the user connector on the 9602 module.
Lists the pin assignments and signal levels for the 9602 module's user connector.
Covers DC power inputs, voltage requirements, and ripple for the 9602 transceiver.
Explains the external on/off input for controlling the 9602 transceiver's power state.
Provides insight into the electrical power profile and current consumption of the 9602.
Describes the RS-232 9-wire serial interface for data and commands on the 9602.
Details the digital output indicating satellite network visibility for the 9602.
Describes the output signal for indicating transceiver power supply status on the 9602.
Specifies the MMCX male connectors for the 9602 transceiver's RF interface.
Details the main RF connector for antenna connection on the 9602 transceiver.
Lists the required antenna impedance, gain, polarization, and VSWR for the 9602.
Describes the pass-through GPS connector for sharing the main antenna on the 9602.
Summarizes the general RF interface parameters like frequency range and impedance for the 9602.
Contains key radio characteristics including average power and receiver sensitivity for the 9602.
Explains the S-meter readings for signal strength and their interpretation on the 9602.
General| Brand | Iridium |
|---|---|
| Model | SBD9602 |
| Category | Transceiver |
| Language | English |
