IRIS DIST500-F User Manual

iris-GmbH | Ostendstrasse 1 – 14 | 12459 Berlin | Germany Rev. 1.2 | 2016-02
www.irisgmbh.de Subject to alterations!
Automatic passenger counting
IRMA – Infrared Motion Analyser
5
th
generation
IRMA MATRIX
Start on the PC via Ethernet
Operating Instructions
For the service software variants of
 IRMA-MATRIX-Configuration
 IRMA-MATRIX-Visualization
 IRMA-TestRide-IRMA MATRIX

IRIS DIST500-F Specifications

General

Brand	IRIS
Model	DIST500-F
Category	Accessories
Type	Distance Sensor
Protection Rating	IP67
Power Supply	DC 12-24V

Summary

General Information

Symbols and Abbreviations

Defines symbols and abbreviations used in the IRMA MATRIX operating instructions.

Document Overview

Provides a brief description of the IRMA MATRIX sensor and its Ethernet connection.

Preparation and Setup

Required Equipment List

Lists the essential PC hardware, software, and cables for IRMA MATRIX setup.

Work Step Overview

Outlines the sequence of necessary steps for connecting and configuring the IRMA MATRIX sensor.

Network Architecture Settings

PC IP Address Configuration

Setting the PC Network Adapter IP

Guides users on changing the PC's IP address for sensor communication.

Configuring a Second IP Address

Explains how to add a secondary IP address to the PC for sensor interaction.

WLAN Deactivation

Sensor Connection Procedures

Connecting via SCON-S-CAN-ETH

Step-by-step guide for physical connection using the SCON-S-CAN-ETH connector.

Connecting via SCON-S-ETH

Step-by-step guide for physical connection using the SCON-S-ETH connector.

Service Software Operation

Initial Software Configuration

How to set the target path for the service software before the first launch.

Software Startup Essentials

Important steps and considerations for starting the service software and sensor.

Resetting PC Network Settings