3.1 Add eSIM through Download directly.
Select Download directly, your phone will start download-
ing eSIM from SM-DP+, the download maybe take one
minute or so depending on the Wi-Fi network condition.
After the reboot connect to the WiFi network again and
continue the setup.
Scan QR code if Download directly fails. If you are prompt-
ed to scan a QR code, find it in your Consumer Cellular
packing slip or email if purchased at a retailer.
The eSIM will be enabled once eSIM download is
finished, then device will reboot automatically.
6
To Next Page
Loading...
