6.2.2 Download Notes with MyScript Ink Retriever
1. Connect the receiver unit to your computer with the provided USB cable.
2. Start MyScript Ink Retriever.
On Windows the MyScript Ink Retriever application starts automatically.
3. Type in a prefix for your notes. The prefix is added to each note name.
4. Indicate where you placed the receiver. Note that Center is recommended.
5. Click Download ink to download the notes from the receiver.
The notes are stored in the default location. Click the tab Retrieval Settings to see to which folder your
notes are downloaded.
Tip: to delete notes from the receiver after downloading them, click the Retrieval Settings tab > select
Advanced Settings > select the option Clear files from device after downloading.
6.2.3 Activate the IRISNotes software
Before using IRISNotes you are recommended to activate it. Unactivated versions are only available for 30
days.
1. Start the IRISNotes software.
2. You are asked to activate the software. Click Activate to do so.
3. Enter the activation code you find inside the product box, and click Activate again.
Note that an internet connection is required to activate.
To Next Page
Loading...
Need help?
General