with normal operation. If one says YES to
defaults, then the original default settings are
stored for the selected channel overwriting the
pre vious S550 settings for that channel.
ANGLE OF VIEW
The angle of view for S550 viewing head utilizing
the IR detector will be the same as the S511
because the Ge photo de tector element is 1mm in
diameter which results in an angle of 1.0°. When
using the UV detector the angle of view will be the
same as the S506 which is about 3.0 °. See section
SIGHTING OF VIEWING HEAD for details.
GENERAL COMMENTS
It will be obvious to the user of this new
innovative product that this is the ultimate state-
of- the-art flame monitor. The way it works has
been described only in a general sense and
obviously the algorithms imple mented by the
embedded controller software are proprietary and
will not be made pub li c. Any existing P520 or
P522 signal processor can be upgraded to an S550
compatible processor by changing the controller
chip and the front panel.
TECH NI CAL HELP
For technical help in applying this product please
contact:
Factory and Repairs:
IRIS Systems Inc.
(JB Systems, Inc.)
4944 - 113th Avenue North
Largo, FL 33760
Tel: 727 545-3900
Fax: 727 547-9589
Sales and Appli ca tions Support:
IRIS Systems Inc.
7583 Vantage Placey
Delta, BC V4G 1A5
Tel: 604 584-4747
604 538-5972
Fax: 604 581-9790
1-800-667-IRIS
PAGE 14
IRIS MODEL S550 APPLICATION MANUAL
To Next Page
Loading...
Need help?
General
