Place the Product
Place the product upright on a stable surface and insert the power plug
into the electrical outlet.
Select the Preferred Air Flow Strength
Turning the knob selects the desired air flow strength.
Stop the Product
Turn the knob to OFF to stop the operation.
HOW TO USE
Adjusting Angle
Vertical
• Vertical angle can be adjusted manually across 6 steps
from approximately -20 to 90 degrees.
Medium HighLow
Internal Cleaning
1 Unscrew the screws from the back cover of the fan.
Press in and disengage the 4 claws on the top and bottom
of the front guard, and then remove the front guard by
pulling it toward you.
External Cleaning
• Wipe lightly using a soft cloth.
• For hard to remove dirt, wipe using a cloth containing a
diluted neutral detergent.
2 Remove debris using a vacuum cleaner. Wipe off debris
that cannot be removed by vacuuming using a soft cloth.
3 Align claws on the top and bottom of the front guard with
the guides on the back of the guard, align the handle on
the back with the groove on the top of the front guard, and
press until it snaps into place.
CLEANING AND MAINTENANCE
Always turn off the power and unplug the power plug from the electric socket when cleaning the
product. Use caution, the motor will be hot immediately after use. Confirm the motor has cooled
before cleaning the product.
Do not use paint thinner, alcohol, benzene, alkaline detergent, or bleach, etc. when cleaning the
product. Using such substances can cause damage, malfunctions, or changes in color, shape,
and quality.
CAUTION
Using the product in dusty condition can cause it to malfunction. Check and clean the product regularly.
Storage
If product is not in use for extended periods of time, cover the product
and store in places with low humidity and no direct sunlight.
5 6
To Next Page
Loading...
Need help?
General
