Place the Product
Place the product upright on a stable surface and insert the power plug
into the electrical outlet. The product will beep when buttons are pressed.
Replicates breeze patterns by changing the strength of the air flow.
• Press the breeze setting button to start the natural breeze pattern. Air
flow strength indicator light will turn off.
• Press the breeze setting button again to turn the indicator light off and
return the product to normal operation.
• The breeze pattern setting can also be turned on using the button on the
remote.
• To return to normal operation using the remote, please press the desired
air flow strength button.
Start the Product
Press the power button to turn the product on.
• The product will start running at the last setting used if the power
plug has not been pulled out.
• The product can also be turned on using the power button on the
remote control.
Select the Preferred Air Flow Strength
Pressing the air flow strength button lights the indicator light and changes
the air flow strength.
• Press the left arrow button to decrease air flow.
• Press the right arrow button to increase air flow.
HighLow
Turbo
Stop the Product
Press the power button during operation to turn the product off. The
product will beep before the power turns off.
Start Timer
Pressing timer button changes the preset time as follows:
The timer can also be changed using the timer buttons on the remote
control.
To turn the product off with the remote, press the button for the selected
time again.
2 41 (h)
Select Oscillation
The oscillation cannot be done manually. Please use the oscillation button to
change the angle of the product. Forcibly changing the angle will damage the
product.
Horizontal
• Pressing the oscillation button once will light up the horizontal
oscillation indicator light and start left and right oscillation.
Full Oscillation
• Pressing the oscillation button while vertical oscillation is
running will light up both indicator lights and product will
operate with full oscillation.
• When operating with full oscillation, the product moves left,
right, up, and down.
Vertical
• Pressing the oscillation button while horizontal oscillation is
running will switch the indicator light to the vertical light and
switch oscillation to up and down oscillation.
When using the full oscillation mode, operation is as follows:
Product oscillates left and right as well as up and down simultaneously to provide maximum air coverage.
Horizontal oscillation runs left and right continually. Vertical oscillation stops once every 20 seconds before
beginning down and up oscillation again.
Stop Oscillation
• Pressing the oscillation button while full oscillation is running
will turn off both indicator lights and product will return to
normal operation.
HOW TO USE
7 8
To Next Page
Loading...
Need help?
General
