EN
10 For more information, visit global.irobot.com
Note: To achieve optimal
performance with your robot
and automatic dirt disposal,
clean and/or replace your
robot’s lter as needed.
Install a new bag, sliding the
plastic card into the guide rails.
Discard the used bag.
Press down on the lid making
sure that it is completely closed.
4
3
5
Note: This will seal the bag
so dust and debris cannot
escape.
Replacing the Bag
Pull up on the plastic card
to remove the bag from the
canister.
Lift up on the canister lid to
open.
1
2
Care and Maintenance Instructions for Your Clean
Base
To keep your dirt disposal running at peak performance, follow these
care procedures:
Part Care frequency Replacement frequency
Bags - Bags should be replaced
when prompted by the
LED indicator/app.
Charging Contacts
Visual Docking Target
Once every month -
Blower Cover inside
canister
Once every month
(remove debris from
blower cover)
-
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.