7 For more information, visit global.irobot.com
EN
Note: You can clean your Mopping Pads two
ways; either by hand washing or in a washing
machine.
Hand Washing
Thoroughly wash the Pad with warm water.
Machine Washing
Wash using the warm cycle, then air dry. Do
not tumble dry. Do not wash with delicates.
Cleaning the Mopping Pad
Open the Bin Door to empty the Bin.
Press the Bin Release Button to remove
the Bin.
1
2
Place the Bin back in the robot.
3
Emptying the Bin Cleaning the Filter
Remove the Bin. Remove the Filter by
grasping both ends and pulling it out.
Remove debris by tapping the Filter
against your rubbish bin.
Reinsert the Filter with the ridged grips
facing out. Place the Bin back in the
robot.
1
2
3
Important: The robot will not run if the Filter is
not installed correctly. Replace the Filter every
two months.
To Next Page
Loading...
