9 For more information, visit global.irobot.com
EN
Washing the Bin
Make sure that the Bin is completely dry.
Reinsert Filter and place the Bin back in
the robot.
3
Important: Do not wash the Filter.
Remove the Filter before washing the Bin.
Release the Bin, remove the Filter
andopen the Bin Door.
1
Note: Bin is not dishwasher safe.
Rinse the Dust Bin and Water Tank using
warm water.
2
Cleaning the Front Caster Wheel
Pull firmly on the front Wheel module to
remove it from the robot.
Pull firmly on the Wheel to remove it from
its housing (see illustration below).
Remove any debris from inside
the Wheel cavity.
Reinstall all the parts when finished.
Make sure that the Wheelclicks back
into place.
Important: A front wheel clogged with hair and
debris could result in damage to your floor. If
the Wheel is not spinning freely after you have
cleaned it, please contact Customer Care.
1
2
3
4
Wheel
Axle
Housing
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the Brush.
Cleaning the Edge-Sweeping Brush
1
2
To Next Page
Loading...
