iRobot Roomba e5 - Component Cleaning and Maintenance; Cleaning Multi-Surface Brushes; Cleaning Sensors and Charging Contacts

Roomba
®
e5 Owner’s Guide 6
EN
Pinch the brush frame release
tab, lift the tab, and remove any
obstructions.
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the
caps. Reinstall the brush caps.
Cleaning the Multi-Surface Brushes
Remove any hair or debris
from the square and
hexagonal pegs on the
opposite side of the brushes.
Remove the bin from the
robot and clear any debris
from the vacuum path.
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
1
2
3
4
5
Cleaning the Sensors and
Charging Contacts
Wipe sensors and charging contacts
with a clean, dry cloth.
Important: Do not
spray cleaning
solution or water
onto the sensors or
sensor openings.
1