Roomba
®
i6 Owner’s Guide 4
EN
Dual Mode Virtual Wall
®
Barrier*
Note: For best results, place at least 8 feet (2.5 meters) from the
charging station.
Use the Dual Mode Virtual Wall
®
barrier to keep the robot in the places
you want cleaned — and out of the ones you don’t. It creates an
invisible barrier that only the robot can see. You can leave the device
in position between cleanings.
Choose the mode to meet your needs:
Virtual Wall Mode: When the switch is in the Virtual Wall position ( ), the
device will create a linear barrier to block openings up to 10 feet (3 meters).
Accessories
12in / 30 cm
Halo Mode: Toggle the switch to the Halo position ( ), to create a
circular barrier. This will prevent the robot from approaching zones you
want to protect such as a pet bowl, vase, or under a desk. The Halo
barrier extends approximately 12 inches (30 centimeters) from the
center of the device.
10ft / 3m
Note: The batteries will last about 8-10 months under normal use. If you are
not planning to use your Virtual Wall barrier for an extended period of time, be
sure to turn the switch to the O, or middle position.
Note: This barrier gets wider as it gets further from the device (refer
to illustration).
*Dual Mode Virtual Wall included for select models only
To Next Page
Loading...
Need help?
General
Weight and Dimensions
