FIN INSTALLATION
Your board will come with two smaller side fins and one larger middle fin.
Insert fin into notched se
ction of fin box first then rock fin towards rear of the board
until fin is seated completely in the fin box.
Lock fin into place by flipping the lever lock down into the
locking position.
Repeat steps for 2 outer fins.
Test to make sur
e all fins are secured before paddling.
ADJUSTABLE TRAVEL PADDLE
PADDLE ASSEMBLY
For carrying convenience, the paddle
can be separated into 3 smaller
sections.
Adjustable locking mechanism for
extendable handle.
Be careful to not pinch finger tips
when connecting the two paddle
shafts.
We recommend rinsing the
paddle with fresh water after
every use and removing
upper s
haft to dry.
PADDLE CLAMPASSEMBLY
Pull open C clamp
mechanism by grabbing
notched sides and pulling
firmly towards you.
Apply gentle
pressure,
pressing the C clamp shut.
6
7
To Next Page
Loading...