Assembly & Operating Instructions
Ironmaster Super Bench PRO
Congratulations on your purchase of this fine Ironmaster product. Be sure to read and understand the
operating instructions to achieve the best performance and avoid injury.
1x Ironmaster Emblem
4x M12 x 100mm Hex Bolts
4x M12 Nylock nuts
8x M12 Washers
NOTE:
2x 19mm box wrench or Ratchet
wrench (Not included) required
for assembly
2x Super Bench Foot
Bolt Pack Contents:
1x Incline Seat
1x Super Bench frame
Box Contents:
1x Bolt Pack
and Ironmaster
Emblem
Bench Main Pad
1x Instruction manual (Not Shown)
Description:
This adjustable exercise bench is designed to be used for dumbbell training, in a rack or cage for barbell training, or with
many various optional attachments. It is a heavy duty multi use bench with 11 angle positions and includes a removable
incline seat. Some tools are required for assembly as indicated in the following steps. The maximum load capacity
including the user is 1000 LBS/450 KGS in the flat position and 600 LBS/270 KGS when tilted or the incline seat is used.
Incline Seat shown on bench
Incline Seat
To Next Page
Need help?
General
