Ironside IRL892 - Operating instructions; Working in Automatic mode (self-leveling):

9
Working in Automac mode (self-leveling):
The laser level can project a horizontal line, vercal line or both
simultaneously.
1. Remove the laser from the case and place it on a at, vibraon free
surface or tripod.
2. Turn ON/OFF switch to ON.
The laser level will generate the crossed horizontal and vercal lines
and the laser beam indicator will light.
3. Choose the beams you want to use by pushing the Beam Selector.
4. Before moving the laser level be sure to switch to laser to the OFF
posion which engages the lock protect mechanism.
Operang instrucons