TRANSMITTER
1. LED indicator
- Flashes when the remote unit transmits a reading.
2. LCD display
- Display of the channel, temperature and humidity.
3. RESET key
- Press it to restart the transmitter.
4. Wall Mounting Holder
- Use it to support the transmitter on the wall.
5. CHANNEL slide switch
- Assign the transmitter to Channel 1, 2 or 3.
6. Battery Compartment
- Accommodates 2 x AA size batteries (not included)
BEFORE USING THE TRANSMITTER
1. Remove the battery door.
2. Insert 2 x AA size batteries into the battery compartment. Make sure
you insert them the right way according to the polarity information
To Next Page
Loading...
