2- OPERATING THE PRODUCT
Setting the Time
• Slide LOCK/ TIME SET switch to TIME SET. The clock display begins flashing.
• Press HR button or MIN button to set the desired time.
• Slide the switch to LOCK after setting.
Setting 12 Hour AM/PM or 24 Hour Time Display
• Press 12/24 button to choose the desired display format. “AM” or “PM” will be displayed
only in 12HR format.
Setting Celsius (°C) or Fahrenheit (°F) Format
• Press °C/ °F button to toggle in between Celsius or Fahrenheit readout.
Viewing Indoor and Outdoor Temperature Record
• Press MAX/MIN button once to read indoor Max and Min temperature. Press CLEAR
button to clear indoor Max/Min temp data.
• Press MAX/MIN button again to read outdoor Max and Min temperature. Press CLEAR
button to clear outdoor Max/Min temp data.
• Press MAX/MIN button again or wait for 5 seconds, display will resume to normal temp
display mode.
3- IMPORTANT NOTES
1
When the display becomes to faint, the battery needs to be replaced to assure the products
accuracy and functionality.
2
If any problem, remove the battery, test or replace the battery with a new one, then reinsert the good
battery.
3
Dispose of waste battery according to the national rules.
4
The quality of the instrument won't be ensured if the product is damaged by negligence, improper
usage or dismantling of the parts.
4- SPECIFICATIONS
Operating Temperature Range : +0°C to +40°C (+32°F to +104°F)
Indoor and Outdoor Temperature Measuring Range : -50°C to +70°C (-58°F to +158°F)
Temperature Resolution : 0.5°C / 0.5°F
Power Source : 1x “AAA” battery, 1.5V battery
Battery Life : depending on type of battery, 8-12 months
To Next Page
Loading...
