ETG918
Operating Instructions
1- FIRST STEPS
Place the thermo/hygrometer near a window. Hang it on the wall or place it on a nearby table.
Lead the cable together with the sensing element through the open window to the outside. The
cable adapts to the window sealing shape. But please take care of sharp-edged window
frames—avoid frequent opening and closing of the window.
Open the battery compartment and insert one battery (Type AAA) in the correct polarity.
Remove the protection foil from the LCD display. The unit is now ready to use.
Locations of Control
1. TEMP Button (to read MAX/MIN records of thermometer)
2. CLEAR Button
3. HUMIDITY Button (to read MAX/MIN records of hygrometer)
4. °C/°F Button
Feature
• Indoor-outdoor thermometer, indoor hygrometer
• Weather proof sensor wire (2.9m)
• Records minimum/maximum indoor/outdoor temperatures and indoor relative humidity.
• Celsius or Fahrenheit selectable.
• Temperature resolution: 0.1°C/ 0.1°F.
• Humidity resolution: 1%
To Next Page
Need help?
General
