12
1- Speaker
2- USB Power Cable
3- User’s Manual
Power-on Status: Press the Power Button to turn the speaker on and it
beeps simultaneously with the blue indicator
ashing. The volume is set to 60% by default.
1) TF mode
Plug in TF card with MP3 format music.,press “Mode” button to change mode
alternatively; press to pause or play again; press for 3 seconds to
decrease volume, for volume increase
2) AUX mode
Connect the speaker with audio device like computer/MP3/MP4/IPOD/IPHO-
NE, press for 3 seconds to decrease volume, for volume increa-
se. Under AUX mode, press for pause or playing
3) BLUETOOTH mode
Change the mode into BLUETOOTH, blue light of the speaker will keep gli-
stering. Switch on other bluetooth device like mobile, Laptop, etc to search
for the speaker. When the speaker is found by the bluetooth device, match
the 2 devices. If they’re successfully matched, the speaker will beep. On the
other hand, bluetooth device also displays information concerning successful
connection. As the speaker is able to memorize the last paired device, it will
automatically pair up with the device to which it connected successfully last
time when turned on. If no bluetooth device is available after the speaker is
shifted to BLUETOOTH mode for 5 minutes, bluetooth function of the speaker
will close. For 2nd connection, please turn off the speaker, shift to BLUETO-
OTH mode and re-connect.
Remark: When connection fails, please double check if power is enough for
the speaker; or turn off the speaker and switch on for trying again.
4) Music playing under BLUETOOTH mode
During music playing under BLUETOOTH mode, press for a long time
for volume decrease, for volume increase.
6. Common Function Description
5. System Composition
V+
V-
V- V+
V+
V-
To Next Page
Loading...