Quick Install Guide
10
11
Step 5: Find and Tap into Your Water Line
You need to find your water line (mainline) to connect Irrigreen to your water source.
Tapping into Your Existing Mainline:
1. Shut off water and find your mainline.
2. Cut the mainline underground.
3. Glue in a tee connector to provide water to
Irrigreen sprinkler heads.
*Make sure you check the backflow and anti-
siphon valve regulations in your area.
Tap off
here
Irrigration shut
off valve
Water Main
Line
Tap off
here
1. Near a Spigot
2. Near Irrigation
Shut Off Valve
3. Upstream Side of
Irrigation Valve Box
Where is my mainline?
To Next Page
Loading...