IrriGreen 2 - System Design (2 of 2); Placement for Narrow Zones; Watering Shrubs and Bushes

Quick Install Guide
6
7
Step 1: Measure Pressure
Click or scan for Step
1 video
Measuring your water pressure will tell you the
maximum distance that your sprinkler head will be
able to spray, and help you determine where to place
your sprinkler head(s).
Step 2: Bucket Test (Flow)
Connect your pressure gauge
to your water spigot.
Pressure: 40-80 psi
Make sure you can fill a 5 gallon
bucket in less than 45 seconds
(8 gallons per minute).
Flow: 8+ gpm
Click or scan for
Step 2 video