8
Step 3: Sprinkler Head Placement
1. Mark where you want to place
your sprinkler heads.
(Exact placement not critical as you can
program the head to the shape of the zone.)
2. Using a tape measure, measure to the farthest corner of each zone to
make sure you have enough watering range to reach every part of the zone.
NOTE:
Refer to the psi/distance chart before placing heads. The farthest corner is the
longest distance on the zone.
Click or scan for Step
3 video
• Don’t overlap sprays or zones.
• Place 1 Sprinkler Head per Zone
• Place heads so that they can reach your furthest corners.
Example of two Zones:
Irrigreen
Sprinkler Head
(Zone 2)
Irrigreen
Sprinkler
Head (Zone 1)
22 Ft.
19 Ft.
*Place sprinkler
heads in the
approximate
center of each
zone.
To Next Page
Loading...