20
Click or scan for
Step 15 video
Step 15: Check Sprinkler Connections
2. Open the Irrigreen 2 App on your device.
6. Make sure that all hooked up sprinklers are green with no
errors. (If there is an error, re-check your wiring and check that
the wiring connections on your controller are tight).
7. Finish burying your heads so
that they’re 1/2” above grade
and level with the ground.
3. Press: 4. Press “Test
Sprinkler Wiring”
5. Press “Test All
Connections”
More
1. Make sure all sprinklers are connected with cables.
To Next Page
Loading...