Need help?Do you have a question about the Irritrol MC-42 PLUS and is the answer not in the manual?
General| Number of Zones/Stations | 4 |
|---|---|
| Stations (Expandable) | No |
| Mounting | Wall Mount |
| Enclosure | Plastic |
| Cycle+Soak | Yes |
| Rain Sensor Compatible | Yes |
| Rain Delay | Yes |
| Manual Watering | Yes |
| Master Valve/Pump Start | Yes |
| Display Type | LCD |
| Sensor Input | 1 |
| Indoor/Outdoor Use | Indoor |
| Warranty | 2 years |
| Power Source | AC |
| Valve Outputs | 4 stations |
| Dimensions | 7.95" H x 7.95" W x 3.5" D (20.2 cm H x 20.2 cm W x 8.9 cm D) |
Guidelines for choosing the controller's location and methods for mounting it.
Detailed steps for safely connecting the controller to the 120 VAC power supply.
Instructions for connecting sprinkler valves and integrating a master valve with a pump.
Guidance on creating an effective watering schedule based on needs and cycles.
Defining the specific watering time duration for each station within a program.
Setting the scheduled start times for watering cycles within each program.
Resolving problems like valves not turning on, staying on, or skipping cycles.
Troubleshooting display errors, 'Fuse' indications, and 'Err 1'/'Err 2' messages.
To Next Page