24 25
Campagnolo shifter/brake lever.
8.4.2
8.4.3
- To shift up a few gears at a time, press lever A
and click through twice (max.) until the desired
gear has been selected.
To switch to a smaller chainring or sprocket, do
the following:
- You must keep pedalling while changing
gears.
- Press lever B downwards until you feel the
chain skip and then release immediately.
To switch to a larger chainring or sprocket, do
the following:
- You must keep pedalling while changing
gears.
- Press lever B until you hear the first ‘click’ and
release it when the desired gear has been
selected.
- To shift up a few gears at a time, press lever B
and click through twice (max.) until the desired
gear has been selected.
To switch to a larger chainring or sprocket, do
the following:
- You must keep pedalling while changing
gears.
- Press lever A until you hear the first ‘click’ and
release it when the desired gear has been
selected.
Switching to a larger sprocket and skipping
several gears.
Ultegra and Dura Ace Di2
This system switches gears electronically.
Operation of the grip shift is similar to that
of the mechanical grip shift, but you do not
need to push as hard.
For more information, see the instruction
manuals provided by your dealer/Shimano.
Campagnolo
This shifter has two levers. Lever A is used to
switch to a bigger chainring or sprocket. Lever
B is used to switch to a smaller chainring or
sprocket.
!
Switching to the next largest sprocket.
Switching to a smaller sprocket.
- To shift up a few gears at a time, press lever
A downwards until the desired gear has been
selected. Then release it immediately.
SRAM MTB
This shifter has two levers. Lever A is used to
switch to a bigger chainring or sprocket. Lever
B is used to switch to a smaller chainring or
sprocket.
To switch to a larger chainring or sprocket, do
the following:
- You must keep pedalling while changing
gears.
- Press lever A until you hear the first ‘click’ and
keep it compressed until the desired gear has
been selected.
- To quickly jump to a different sprocket
(skipping other sprockets), press the lever
downwards and keep compressed until the
desired gear is selected.
To switch to a smaller chainring or sprocket, do
the following:
- You must keep pedalling while changing gears.
- Press lever B until you feel the chain skip and
then release immediately.
8.4.4 Shimano MTB
This shifter has two levers.
Lever A is used to switch to a bigger chainring
or sprocket. Lever B is used to switch to a
smaller chainring or sprocket.
To switch to a larger chainring or sprocket, do
the following:
- You must keep pedalling while changing
gears.
- Press lever A until you hear the first ‘click’ and
keep it compressed until the desired gear has
been selected.
- To quickly jump to a different sprocket
(skipping other sprockets), press the lever
downwards and keep compressed until the
desired gear is selected.
To switch to a smaller chainring or sprocket, do
the following:
- You must keep pedalling while changing gears.
- Press lever B until you feel the chain skip and
then release immediately.
Switching to the next largest sprocket. Switching to the next largest sprocket.
Switching to a smaller sprocket. Switching to a smaller sprocket.
To Next Page
Loading...