EasyManua.ls Logo

Isaac Kaon - Burn Hazard; Other Risk Factors and Safety Instructions; Disposing of the Bike; Package Contents, Technical Specifications

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 9
3.3
Torques - screwed connections
Package contents
Isaac Cycle bikes are delivered either fully
assembled by your dealer (excluding pedals) or as
a disassembled frame kit.
Technical specifications
3.1Disposing of the bike
At the end of the bike’s service life, you must
dispose of it in the appropriate manner.
Check with your dealer or contact a recycling
plant.
Follow the maintenance instructions in
Sections 11 and 12.
Burn hazard
Risk of burns!
During longer descents, bike rims and disc
brakes become very hot.
- Never touch a rim or disc brake immediately
after a descent.
- Allow the rim or disc brake to cool before you
touch it.
Other risk factors and safety instructions
Risk of personal injury and material damage!
Failure to observe the instructions in this user
manual may result in dangerous situations,
crashes, accidents and damage to the bike.
- Wear a helmet when cycling.
- Ride in an anticipatory and defensive manner.
- Do not ride if you have consumed alcohol.
- Ride in such a way that you are in control
of your bike at all times and can adequately
respond to sudden danger.
- Wet weather may affect the operation of the
brakes. This means that the braking distance
is longer.
- When cycling, only wear appropriate clothing
which does not hinder the operation of the
bike or obstruct your vision.
- When cycling, only wear tight-fitting trousers
or shorts. Loose clothing can become
entangled in the bike and cause serious
accidents.
- In the dark and in poor visibility, wear
reflective clothing and use the bike lights.
- Additional weight increases the braking
distance.
- Note that certain items of clothing and
backpacks can restrict your movement.
- Follow the maintenance instructions in
Sections 11 and 12.
2.2.3
2.2.4
!
2.3
3 PACKAGE CONTENTS, TECHNICAL SPECIFICATIONS
3.2
Bike type
Headset size
Seatpost
diameter
Bottom
bracket
bearing
Ambient
temperatures
road bike/time-trial
bike/mountain bike
Element (Disc),
Meson, Boson (Disc),
Kaon (Disc), Vitron,
Graviton (Disc),
Baryon 29,
Baryon 650B,
Tensor 29
Muon, Photon
Element (Disc),
Boson (Disc),
Kaon (Disc), Vitron,
Graviton (Disc)
Meson, Muon,
Photon
Baryon 29,
Baryon 650B,
Tensor 29
Element (Disc),
Meson,
Boson (Disc),
Muon, Photon
Kaon (Disc), Vitron,
Graviton (Disc),
Tensor 29
Baryon 29,
Baryon 650B
-10°C tot 50°C
1 1/8” - 1 1/2”
1 1/8”
27.2 mm
Aero seatpost
31.6 mm
Pressfit 86.5x41
BSA
Pressfit 92 x 41
Type
Seatpost
clamp
Saddle clamp
Model
Element (Disc),
Kaon (Disc),
Boson (Disc)
Vitron,
Graviton (Disc),
Tensor 29,
Baryon 29,
Baryon 650B
Meson, Muon,
Photon
Element (Disc),
Meson,
Boson (Disc),
Kaon (Disc)
Muon, Photon
Baryon 29,
Baryon 650B
Tensor 29, Vitron
Graviton (Disc)
Torque
Max. 12NM
Max. 6NM
Max. 8NM
Max. 8NM
Max. 12NM
Risk of personal injury and material damage!
New technical developments may result in
changes to existing models and their technical
specifications and the development of entirely
new models.
- Pay attention to any special instructions.
- Check with your dealer whether this manual is
up-to-date and valid.
Example of an Isaac Cycle racing bike.

Table of Contents