What to do if the starter doesn't work on my Iseki SXE213H95 Tractor?
- JJoseph ChapmanAug 4, 2025
If the starter on your Iseki Tractor isn't working, begin by checking the starter battery; it may be flat or weakly charged and needs charging. Ensure you're correctly seated on the operator's seat to activate the safety switch, and verify the brake pedal is fully depressed to engage its safety switch. Make sure the mower mechanism is switched off. Inspect the fuse on the (+) cable of the starter battery and replace it if necessary. If the grass is too long or wet, adjust the cutting height or move back to create clearance. Also, clear any blockages from the discharge channel or mower deck, remembering to stop the engine and remove the ignition key first. A contaminated air filter can also be the reason, so clean it following the engine manufacturer's instructions.