Iseki SXG19 User Manual

ISEKI LAWN MOWERS
LAWN MOWERS:
MOWER DECKS:
COLLECTOR:

Iseki SXG19 Specifications

General

Brand	Iseki
Model	SXG19
Category	Lawn Mower
Language	English

Summary

Introduction

Safety-Danger, Warning and Caution

Explains safety symbols and warnings: DANGER, WARNING, CAUTION, IMPORTANT, NOTE.

For Safe Operation

How to be a Safe Operator

Ensures operators read manual, use protective gear, and are responsible individuals.

Before Starting the Lawn Mower

Covers setting up operation plans, checking the area, and ensuring safety controls are functional.

Operation of the Lawn Mower

Details safe practices during mowing, including staying away from moving parts and keeping clear of discharge.

Operation on a Slope

Provides warnings and instructions for operating on slopes, emphasizing caution and avoiding steep inclines.

When Filling With Fuel

Outlines crucial safety precautions for handling flammable fuel to prevent fire and explosion hazards.

Caution Labels & Their Positions

Illustrates the location and meaning of various safety labels on the mower and deck.

Warranty and After-Sale Care

Warranty

Information regarding the warranty policy for the lawn mower and mower deck.

After-Sale Care

Guidance on consulting dealers for breakdowns or questions, identifying model and serial numbers.

Specifications

Lawn Mower Specifications

Detailed technical specifications for the SXG 19 and SXG 22 lawn mower models.

Mower Decks Specifications

Technical specifications for SCMA 54B and SCMA 48B mower decks.

Controls and Meters

Control Panel (UE TYPE)

Identifies controls and indicators on the UE type control panel.

Control Panel (UGE TYPE)

Identifies controls and indicators on the UGE type control panel.

Starter Switch

Explains the operation of the starter switch for engine starting and stopping.

Throttle Lever

Details the function of the throttle lever for controlling engine speed.

Monitor Lamp Array

Describes the warning lamps for engine coolant, battery charge, and oil pressure.

PTO Lever

Explains how to engage and disengage the Power Take-Off (PTO) lever.

Fender (Wing) Panel

Identifies controls on the fender panel, including lift lever and parking brake.

Control Pedals

Describes the function of brake, forward, reverse, and dif-lock pedals.

Pre-Operational Routine Inspection

Inspection Items

Lists essential checks before daily operation, covering tires, fluids, and exterior parts.

Way of Inspection and Maintenance

Refers to the 'MAINTENANCE' section for detailed inspection and maintenance procedures.

Operation

Before Starting the Engine

Ensures pre-operation checks are completed and safety instructions are followed.

Starting the Engine

Provides step-by-step instructions for safely starting the engine, including pre-heating.

Stopping the Engine

Details the correct procedure for stopping the engine, including idling and applying brakes.

Travelling

Guides on safe travelling, including lifting the mower deck and checking surroundings.

Stopping

Describes the procedure for stopping the lawn mower, including releasing pedals and applying brakes.

Maintenance

Engine Oil Level

Instructions for checking and maintaining the engine oil level.

Transmission Oil Level

Guidance on checking and replenishing transmission oil level.

Coolant Level

Procedure for checking and maintaining the engine coolant level.

Fuel Level

Instructions for checking the fuel level and safety precautions during refueling.

Air-Cleaner

Details on cleaning and inspecting the air cleaner element.

Fuel Strainer

Instructions for inspecting and cleaning the fuel strainer.

Fan Belt

Guidance on inspecting the fan belt for tension and damage.

Maintenance of Front PTO

Instructions for adjusting the tension of the front PTO belt.

Adjustment of Brake

Describes how to adjust the brake pedal and parking brake.

Neutral Position of HST

Explains the adjustment procedure for the Hydrostatic Transmission (HST) neutral position.

Tyre Pressure (Inflation)

Specifies correct tyre pressures and warnings about improper inflation.

Engine Oil Replacement

Step-by-step guide for replacing the engine oil.

Periodical Inspection Table

A table outlining periodic inspection and servicing intervals for various components.

Storage

Daily and Short Term Storage

Covers cleaning and preparing the mower for short-term storage.

Long Term Storage

Details procedures for preparing the mower for extended storage.

Troubleshooting

Engine Troubleshooting

Addresses common engine problems like not starting, irregular speed, or overheating.

Master Brake System Troubleshooting

Covers issues with braking effect, uneven braking, and pedal return.

Lift System Troubleshooting

Diagnoses problems with the mower deck lift not rising or lowering.

Steering System Troubleshooting

Addresses steering wheel stiffness or tendency to turn in one direction.

HST Troubleshooting

Troubleshoots issues with the hydrostatic transmission, like not travelling or creeping.

Electrical Accessories Troubleshooting

Covers problems with battery charging, lights, and fuel pump.

Mower Decks

Attaching and Detaching Mower Deck

Provides instructions for mounting and removing the mower deck.

Mower Operation

Covers pre-operation checks, cutting height adjustment, and starting mowing.

Inspection and Maintenance of Major Parts

Inspection and Replacement of Bevel Gear Case

Details checking and replacing oil in the bevel gear case.

Inspection and Replacement of Front Belt

Covers inspection and replacement of the front drive belt.

Inspection & Replacement of Blades

Guides on inspecting, adjusting, and replacing mower blades.

Cleaning of Mower Deck

Instructions for cleaning the mower deck, including removing grass and debris.

Periodical Inspection Table

A table of periodic inspection and servicing intervals for mower deck components.

Storing the Mower

Collector

Names of Major Components

Identifies major components of the SBC550X-HE4 (High dump) and SBC550X-LE4 (Low dump) collectors.

Detaching and Attaching Collector

Provides instructions for detaching and attaching high and low dump collectors.

Collector Operation

Covers pre-operation checks, adjusting the grass limit sensor, and cleaning the collector.

Storing the Collector