9
isel-CNC Compact Equipment CPM
2 x
Above all, keep the triangular wrench always outside of the machine during
transportation.
The clamping set is made up by a hand lever clamping assembly and two stop bars with
mounting hardware for the T-slot plate.
Always ensure that the workpieces are
properly secured.
For the accessories, different parts are
already pre-installed or prepared for mounting.
For this purpose, also read the information in the appendix.
You can connect the cable of a tooling machine to the coupler
terminal block in the branch box at the side of the Z-axis.
To Next Page
Loading...
