The EMX-7150 should not
be plugged or unplugged
into a mixer console or PA
system unless the input
channel is muted. If the sys-
tem does not have a muting option the
volume should be turned off. This
avoids loud popping noise that can
cause damage in speakers and/or af-
fect your hearing.
This electronic device should
be disposed separately from
your household waste at the
end of its lifetime. There are
various collection systems for
recycling in the European Union. For
further information please contact
your local authority or retailer where
you have purchased the product.
This microphone is a maintenance free
product but could require a recalibration
in case of a mechanical impact or perodi-
cal temperature cycling/use at the min
and max working temperature.
In an unlikely event of equipment failure,
please contact your local iSEMcon repre-
sentative or the iSEMcon factory located
in Germany (sales@iSEMcon.com).
Unauthorised dismantling of the mic-
rophone will invalidate the warranty.
MAINTENANCE
ELECTRONIC WASTE
INSTALLATION
To Next Page
Loading...
Need help?
General