14
-
23
!
C
omply with the specifications on the rating plate of the motor or the electrical
components..
!iSHAN centralized lubrication systems must not be used in other purposes other than
lubricating machines.
2-1.2Before lubricant filling
You must observe the machinery manufacturer's information on the lubricants to be used in
the machinery.
!Use only new oil with a permitted range of oil viscosity from 30 to 250cSt.
Warning !Motor jammed or burned due to high resistance which caused by delivering higher
than an oil viscosity of 250cSt, no pressure build-up in centralized lubrication system or
insufficient oil delivery caused by pumping lower than an oil viscosity of 30cSt result in
centralized lubrication system failure.
!No water or chemicals.
!Keep the lubricator reservoir clean to ensure the normal lubrication operation.
2-1.3 Control panel safety information
!In order to avoid disorders of the control panel, never let it have contact with water or oil.
2-1.4 Faults
!Only qualified, instructed specialists who are authorized by iSHAN may repair lubricators
and must use the original spare parts.
To Next Page
Loading...
