What to do if I can't find iSimple TranzIt BLU when searching for Bluetooth devices?
If you can't find the iSimple TranzIt BLU when searching for Bluetooth devices, it might not be in pairing mode anymore. This mode only lasts for 2 minutes after you turn your vehicle on. To fix this, turn your vehicle off and then back on again. Try to pair your device within the first 2 minutes.
What to do if I see a 'Pairing unsuccessful' message on my Apple device with iSimple Automobile Accessories?
If you get a 'Pairing unsuccessful' message on your iPod, iPhone, or iPad when trying to connect to iSimple TranzIt BLU, it means the device didn't properly establish a Bluetooth connection. Try pressing 'Connect' again. If it still fails, turn the ignition off and then back on, and try pairing again.
How to fix iSimple Automobile Accessories when there is no audio from my device?
If you're not getting any sound from your Android, iPod, iPhone, or iPad when using your iSimple Automobile Accessories, there are a couple of things to check: * First, make sure your radio is tuned to the correct station, which should be 88.3FM. * If that doesn't work, the device might not be paired. Please reference section 5 for device pairing.
Why is the audio distorted with my iSimple Automobile Accessories?
Audio distortion with your iSimple Automobile Accessories can occur if the input from your Android device is too loud. Try turning down the volume on your Android Device, iPod, iPhone, or iPad until the distortion disappears.
How to access regular FM stations with iSimple Automobile Accessories?
To access regular FM stations with your iSimple Automobile Accessories: * If the ISFM23 is active, pause the Android Device, iPod, iPhone or iPad, and wait 8 seconds. * Alternatively, access the ISFM23 App and select the OFF option.
What to do if my iPod says 'Pairing unsuccessful' with iSimple TranzIt BLU ISFM23 Car Receiver?
If you see a 'Pairing unsuccessful' message on your iPod, iPhone, or iPad when trying to connect to the iSimple Car Receiver, it means the device didn't properly establish a Bluetooth connection. Try pressing "Connect" again. If it still fails, turn the ignition off and then back on, and try pairing again.
Why is there no audio from my iPhone with iSimple Car Receiver?
If you're not getting any audio from your Android device, iPod, iPhone, or iPad through the iSimple Car Receiver, it could be due to a couple of reasons. First, make sure your car radio is tuned to the correct station, specifically 88.3FM. Also, the device may not be paired. Please reference section 5 for device pairing.
How to fix distorted audio on iSimple TranzIt BLU ISFM23?
If the audio from your iSimple Car Receiver is distorted, it's likely that the input volume from your Android device, iPod, iPhone, or iPad is too high. Try turning down the volume on your device until the distortion disappears.
What to do if I cannot access regular FM stations on iSimple Car Receiver?
If you cannot access regular FM stations when using the iSimple Car Receiver, it might be because the ISFM23 feature is active. Pause the audio on your Android Device, iPod, iPhone, or iPad and wait 8 seconds. Alternatively, access the ISFM23 App and select the OFF option.
General| Brand | iSimple |
|---|---|
| Model | TranzIt BLU ISFM23 |
| Category | Car Receiver |
| Bluetooth | Yes |
| Bluetooth Version | 4.0 |
| USB Charging | Yes |
| USB Port | Yes |
| Auxiliary Input | Yes |
| FM Modulation | Yes |
| FM Radio | Yes |
| Power Supply | 12V DC |
| Compatibility | Universal |
To Next Page
