iSinwheel V8 - Battery and Charging; Battery Usage and Warnings; Charging Procedure

■ Always check the battery level before using.
■ Do not ride when its battery level is low! Charge the battery when the battery indicator
signals low level.
■ Do not use the device if the battery gives out any odor, excessive heat or leakage.
■ Do not use the device when the battery is charging!
■ Ensure the charging port is dry before charging!
■ Charge the device only with the included/authorized power adapter.
■ Do not continue riding when the battery level reaches minimum. Otherwise, it will affect
battery's life.
Battery
1. Plug the AC end of charger into mains socket (110V- 240V AC, 50/60 Hz). The
indicator on the charger lights up green.
2. Plug the other end of the charger into the device. The indicator on the charger will turn
red.
3. When the indicator turns from red to green, the charging is complete. Disconnect
charger from device and electrical outlets.
Do not overcharge the device, as it may affect battery life.
Charging
Always check the battery level before using. Do not ride when its battery level is low.
When the battery level of the skateboard is below 10%, it will issue sounds - in such
case, stop, get off, and power off the skateboard!
Warnings:
Battery and Charging
06