Islandaire EZ Series User Manual

- 1 -
PACKAGED TERMINAL
AIR CONDITIONER/HEAT PUMP
INSTALLATION INSTRUCTIONS & OWNER'S MANUAL
EZ42/EZDR
ATTENTION INSTALLATION PROFESSIONAL
As a professional installer you have an obligation to know the product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with this instruction manual. Pay special attention to all safety
warnings.
Often during installation or repair it is possible to place yourself in a position which is more hazardous than when the unit
is in operation.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a customer
in its safe use.
Safety is a matter of common sense, a matter of thinking before acting. Most dealers have a list of specific good safety
practices, follow them.
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is
a direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.

Islandaire EZ Series Specifications

General

Refrigerant	R-410A
Type	Packaged Terminal Air Conditioner (PTAC)
EER	Up to 12.0
Mounting Location	Wall
Controls	Electronic thermostat with remote control
Dimensions (H x W x D)	Approx. 16" x 42" x 16"
Filter Type	Washable filter