11
Charge
There is a Li-ion battery as power source in the meter. When
the battery indicator shows low battery, charge the meter as
soon as possible. When battery charge complete, the battery
indicator will show full level on the display.
˙Always use the typical mini USB plug adaptor to charge.
˙Do not continue to charge more than 8 hours to prevent the
battery damage.
Connect to PC
PC
PC
The meter can connect to PC by USB cable. Follow the below
steps to setup.
1. Connect PC and meter by USB cable.
2. Turn on the meter power.
3. Insert the software CD to CD-ROM of PC.
4. Install the driver and software.
5. Start the software and communicate with meter.
To Next Page
Loading...
Need help?
General
