1
Warning
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
Safety sheet
. . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
. . . . . . . . .
Read First
Safety Information
Understand and follow operating instructions carefully.
Use the meter only as specified in this manual; otherwise,
the protection provided by the meter may be impaired.
WARNING
This Identifies hazardous conditions and actions that could
cause BODILY HARM or DEATH
˙When using test leads, keep your fingers behind the finger
guards.
˙ Always use proper test probes for measurements.
˙Discharge all high-voltage capacitors before testing.
˙Do not use meter around explosive gas or vapor.
˙To reduce the risk of fire or electric shock do not expose
this product to rain or moisture.
˙Do not touch any circuits or parts of circuits if there may be
30VAC rms or 30 VDC on them.
˙Be careful of the test probes, which are sharp and dangerous.
CAUTION
This identifies conditions and actions that could DAMAGE the
meter or equipment under test.
˙Never connect a source of voltage to the meter. That may be
damage the meter.
˙Discharge all capacitors before testing.
˙Do not expose meter to extremes in temperature or high
humidity.
˙Do not drop the meter. That maybe damage the meter or
cause out of specification.
˙Never use unspecified adaptor to charge meter.
˙Do not continue to charge more than 8 hours to prevent the
battery damage.
Warning
Safety sheet
To Next Page
Loading...
