To Next PageTo Next Page
Need help?Do you have a question about the iSolution iMove 200SR and is the answer not in the manual?
General| Brand | iSolution |
|---|---|
| Model | iMove 200SR |
| Category | Flood Light |
| Language | English |
General warnings to prevent electrical shock, fire, and equipment damage.
User cautions regarding internal components and self-service.
Guidelines for proper mounting, ventilation, and secure fixture attachment.
Illustrations of beam angle and lux output at various distances.
Step-by-step guide for installing or replacing the HID 150W lamp.
Description of the physical control panel interface and its components.
Overview of menu navigation and selection of primary functions.
Setting the DMX channel configuration (8 or 13 channels).
Selecting and operating pre-programmed light show sequences.
Configuring the unit for operation as a slave in a master/slave setup.
Enabling or disabling the blackout function for lighting effects.
Inverting the direction of pan movement for the fixture.
Inverting the direction of tilt movement for the fixture.
Controlling the status of the unit's LED display.
Initiating an automatic test sequence for the unit's functions.
Operating the unit as a master to control other fixtures.
Displaying the total accumulated operating hours of the fixture.
Displaying the current software version installed on the unit.
Procedure to reset the unit to its default factory settings.
Adjusting the home position for various fixture movements.
Setting up synchronized shows via master/slave connection.
Using the easy controller for master/slave mode operations.
Using iMove, iRock, and iShow for integrated DMX control.
Setting DMX addresses for controlling units via a DMX controller.
Mapping of DMX channels for 8-channel operational mode.
Troubleshooting steps for a completely non-functional unit.
Diagnosing DMX signal reception and address setting issues.
Resolving problems with the easy controller's connection or response.
Troubleshooting sound-activated mode functionality.
Identifying and resolving issues with specific DMX channels.
Resolving intermittent lamp operation and potential overheating issues.
Procedure for replacing a broken pan belt on the fixture.
