Isomac Brio - Characteristics and Technical Data; Technical Data; Safety Recommendations and Rules; General Safety Rules

12
2. CHARACTERISTICS AND TECHNICAL DATA
The BRIO espresso coffee machine has the following features:
• built-in coffee grinder with instant grinding
• fully stainless steel construction
• stainless steel cup rack warmer
• drip tray and cup rack in stainless steel
• coffee distributor with chrome-plated cup ring
• nternal water/steam tap in brass with safety by-pass
• chrome-plated copper water/steam nozzle
• brass boiler
Technical Data:
Depth: 270 mm Pump: 12-14 atm
Width: 300 mm Tank: 3,5 l
Height: 360 mm Power: 1000 W
Weight: 11 kg Voltage: 230V-50Hz
115V-60Hz
Coffee grinder capacity: 250 g
3. SAFETY RECOMMENDATIONS AND RULES
Follow these rules carefully:
! the BRIO espresso machine should only be used for the purpose for which it was made
! improper use of the machine can cause damage to persons and property for which the
manufacturer cannot be held responsible
! always contact a qualified service center or the manufacturer for operations other than
those described in the instruction book and for all types of repairs
! make sure the mains voltage is the same as the data on the rating plate
! make sure the electric power system is compatible with the data on the rating plate
! the coffee maker should be well and safety grounded. Have the system checked if you
have any doubts
! make sure the power system is equipped with a safety cutoff that works properly and
that the cross section of the cables is sufficient for the power absorbed
! for any type of malfunction or problems not specified here, unplug the machine and do
not attempt to check and/or repair it yourself. Contact a qualified service center or the
manufacturer
! do not fill the tank with water when the machine is plugged in
! make sure there is water in the tank when the machine is operating
! do not change the grinding parameters when the coffee grinder is running
! do not forget to turn the steam switch off after using the steam function
! never place your hands or other parts of the body in the path of the water/steam nozz-
le. Hot water and steam can cause serious burns
! never place your hands or other parts of the body or any other object inside the machi-
ne when it is plugged in
! never touch the machine with wet hands or feet