iSonic CDS-100 - CARE AND MAINTENANCE; Do not turn on the unit without water in the tank.; Do not run the unit for extended time or continuously.; Do not keep water in the cleaning tank for a long time.

The manual should be carefully reviewed before starting to use the device.
Warnings should be observed carefully. Please follow the manual for operations.
INTRODUCTION
Read the Manual First
目 录
Principles of ultrasonic cleaning:
Millions of tiny air bubbles are generated inside the liquid by high frequency vibration.
The air bubbles bust inside the liquid and shake off the debris to achieve the cleaning
effect.
Use tap water. Chemical solutions are unnecessary in most cases.
Main Features
600 ml / 0.64 qt; 16.1x8.5x5.0 cm/6.34"x3.35"x1.97"，
16.1 cm / 6.34"
Tank capacity: Size:
Longest item that can fit inside the tank is
Control panel with capacitive sensing technology. Durable, reliable, resistant to
water and harsh chemicals .
Digital timer with 5 settings, suitable for different applications
Industrial grade IC, moisture-proofed PCB and cooling fan. Improved product durability.
Detachable power cord, convenient to use.
Safety Precautions
Items Not Suitable for Ultrasonic Cleaning ----------------------------2
Applications ------------------------------------------------3
Sample Applications -------------------------------------------4
Product Exploded View ---------------------------------------5/6
Dirt Elimination Processes---------------------------------------7
Product Structure and Accessories ---------------------------------7
Common Cleaning Methods --------------------------------------8
Use of Optional Accessories --------------------------------------8
Operation Guidelines ----------------------------------------9/10
Care and Maintenance -----------------------------------------11
Specifications ----------------------------------------------12
-------------------------------------------½
CARE AND MAINTENANCE
MAX
M
AX
MAX
11
Do not turn on the unit without water in the tank.
If it is turned on for over 30 seconds without water in the
tank, it may damage the unit or severely reduce the life
of the unit.
Do not run the unit for extended time or continuously.
Do not run the unit continuously for over 30 minutes. Stop
for about 10 minutes in between to prolong the life of the
unit.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, unplug the power cord then pour
the water out through the pouring recess. Avoid getting the
water inside the housing through the vents and causing
damage.
Do not spray water over the housing.
Use a towel to wipe the tank and the housing.
Do not expose the unit under direct sun shine for long.
Keep the unit in a dry, cool and ventilated area.
Purified water or distilled water has the same cleaning effect as regular tap
water for ultrasonic cleaning. Therefore using tap water is sufficient.
When cleaning silver or copper items where oxidation has darkened the items,
special solutions need to be added to the water to remove the oxidation.
USE OF OPTIONAL ACCESSORIES