To Next PageTo Next Page
Need help?Do you have a question about the Isotemp Slim/B and is the answer not in the manual?
General| Capacity | 20L, 30L, 40L |
|---|---|
| Material | Stainless steel |
| Insulation | Polyurethane foam |
| Heating element power | 750W |
| Voltage | 230V |
| Working pressure | 6 bar |
| Frequency | 50/60 Hz |
Guidelines for correct product disposal and recycling according to WEEE directive.
Specifies use of non-corrosive fittings like brass or stainless steel for connections.
Details on heat-resistant, reinforced hoses for engine and fresh water connections.
Instructions for connecting the water heater to the engine coolant circuit using specific hoses.
Procedure for connecting the fresh water supply and hot water outlet to the plumbing system.
Guidance on safe electrical hookup, including grounding and circuit protection requirements.
Procedure for draining the tank and hoses to prevent freezing damage during winter.
Instructions for resetting the overheat protector and replacing thermostats.
Step-by-step guide for safely removing and installing the heating element.
Table detailing specifications for Isotemp Basic water heaters, including volume, weight, and element options.
Table detailing specifications for Isotemp Slim/B water heaters, including volume, weight, and element options.
Table detailing specifications for Isotemp Slim Square water heaters, including volume, weight, and element options.
