Need help?Do you have a question about the Isotherm CLEAR and is the answer not in the manual?
Kits are available to direct hot air externally, improving installation versatility.
Connect to the boat's main water system using supplied hoses for water inlet and outlet.
Package contents include a plastic scoop, 4 plastic feet, and an instruction manual.
Pour 3 liters of potable or mineral water into the water bin to prime the ice maker.
The ice maker is built to work exclusively with potable or mineral water.
Connect the ice maker to the main power supply system for operation.
Press the button located on the front of the ice maker to turn it on.
The initial ice cycle takes 30-40 minutes due to system cooling requirements.
Subsequent ice cycles are faster, taking approximately 10 minutes to complete.
Controls the quantity of ice in the bin and triggers automatic shutoff.
Regulates the evaporator temperature and the thickness of the ice cubes.
Manages the duration of frost and defrost cycles for operation.
Explains defrost and ice formation cycles based on timer position.
Set both thermostats between 4 and 5 for optimal performance, even with high ambient temperatures.
Enables ice production from mineral water when installed.
Lists spare part numbers for the 230V and 115V water kits.
Terminal for connecting the water-kit pump to the ice maker.
Connects the 9mm inlet and 18mm outlet hoses included in the water kit package.
Refers to a sticker on the ice maker's back for the small wiring diagram.
Connect the pump wiring marked 'L' to live and the other to neutral ('N').
Clean the water kit thoroughly to remove any impurities before use.
Pour water directly into the ice bin to fill the water kit efficiently.
The Indel Webasto Marine Clear ice maker produces 18kg of ice per day.
The ice bin is not refrigerated.
Maintenance is required for long shutdowns as detailed in the installation manual.
Kits are available to direct hot air externally, improving installation versatility.
Connect to the boat's main water system using supplied hoses for water inlet and outlet.
Package contents include a plastic scoop, 4 plastic feet, and an instruction manual.
Pour 3 liters of potable or mineral water into the water bin to prime the ice maker.
The ice maker is built to work exclusively with potable or mineral water.
Connect the ice maker to the main power supply system for operation.
Press the button located on the front of the ice maker to turn it on.
The initial ice cycle takes 30-40 minutes due to system cooling requirements.
Subsequent ice cycles are faster, taking approximately 10 minutes to complete.
Controls the quantity of ice in the bin and triggers automatic shutoff.
Regulates the evaporator temperature and the thickness of the ice cubes.
Manages the duration of frost and defrost cycles for operation.
Explains defrost and ice formation cycles based on timer position.
Set both thermostats between 4 and 5 for optimal performance, even with high ambient temperatures.
Enables ice production from mineral water when installed.
Lists spare part numbers for the 230V and 115V water kits.
Terminal for connecting the water-kit pump to the ice maker.
Connects the 9mm inlet and 18mm outlet hoses included in the water kit package.
Refers to a sticker on the ice maker's back for the small wiring diagram.
Connect the pump wiring marked 'L' to live and the other to neutral ('N').
Clean the water kit thoroughly to remove any impurities before use.
Pour water directly into the ice bin to fill the water kit efficiently.
The Indel Webasto Marine Clear ice maker produces 18kg of ice per day.
The ice bin is not refrigerated.
Maintenance is required for long shutdowns as detailed in the installation manual.
To Next Page
General