Like all Indel Webasto Marine products the most important thing is:
VENTILATION
Producing ice requires a higher heat removal so ventilation must be more than
adequate. The ice-maker gets fresh air off the front grid and blows it off the back
much hotter. To make the ice-maker work perfectly it’s important that the front grid
is always open and not partially or completely blocked. At the same time on the
back of the installation hole a ventilation grid has to be created to let hot air out.
If ventilation is difficult to achieve Indel Webasto Marine can supply a ventilation kit
which allows to direct the hot air flux to the outside, making the installation more
versatile.
Ventilation kit 230V 50-60Hz spare part number SBE00094AA
Ventilation kit 115V 60Hz spare part number SBE00108AA
To Next Page
Loading...
